The Tycon TP-VRHP-4824 Voltage Converter is a high-reliability isolated DC-to-DC voltage converter designed to deliver 24VDC output from a wide 36–72VDC input range, typically used in telecom, PoE, and industrial applications. It supports up to 2.9A continuous output (approximately 70W), features full electrical isolation, and is housed in a rugged metal case suitable for DIN rail mounting. The device is engineered for demanding environments where regulated 24V power is essential. ⚡ Electrical Specifications Input Voltage Range: 36VDC to 72VDC Output Voltage: 24VDC (regulated) Output Current: 2.9A continuous Maximum Output Power: 70W Conversion Efficiency: Greater than 85% Load Regulation: ±5% Line Regulation: ±1% Ripple & Noise: Ripple: Max 2% Peak Noise: Max 5% Electrical Isolation: Input to Output: ≥1500VDC Isolation Resistance: ≥100MΩ Startup Time: Typically <1 second Protections: Short circuit (auto-recovery) Overvoltage protection Overload protection ��️ Mechanical and Physical Specifications Enclosure Material: Metal (rugged industrial design) Mounting: DIN rail compatible (brackets included) Dimensions: 133mm × 75mm × 38mm (5.24″ × 3.00″ × 1.50″) Weight: Approx. 298g (10.5 oz) Cooling Method: Passive convection (fanless operation) Wire Terminals: Accepts up to 12 AWG ��️ Environmental Ratings Operating Temperature Range: –30°C to 65°C (–22°F to 149°F) Storage Temperature: –40°C to 85°C Relative Humidity: 0% to 90% non-condensing Ingress Protection: Sealed enclosure, suitable for industrial indoor use ��️ Safety and Compliance Electrical Isolation: 1500VDC minimum Protections: Short circuit with auto-recovery Overload and overvoltage safeguards Optional low-voltage disconnect in system configuration Certifications: RoHS compliant Warranty: Typically 3 years (check distributor policy) �� Primary Applications Telecom infrastructure with –48VDC systems High-efficiency PoE and security camera power supplies Wireless network base stations Industrial control panels and automation systems Off-grid or battery-based remote sites needing regulated 24V output Meta Description: Tycon TP-VRHP-4824 is an isolated 36–72VDC to 24VDC converter delivering 2.9A (70W) output. Designed for telecom and industrial use, it features 1500VDC isolation, overload protection, passive cooling, and a rugged DIN-rail-ready metal enclosure. Datasheet
